Tyres

Our tyres are hand made in CNC machined metal moulds. They are made from RTV silicone to give you the ultimate traction. they are fragile and should be handled with care off of the car.

Lots of sizes are available, to fit most cars. prices are £2.50 a pair, including postage to anywhere in the UK. International orders have postage at cost added. order 100 pairs get them post free.
diameters are 19, 20 and 21mm, compounds are soft or hard. hubs fitted are SCX standard - ninco std - Scalex standard Fly - std and viper type, ninco motorsport cars, ninco classic Scalex Cadillac, Fly classic. etc... for special requests please mail or call - e-mail info@gtslot.co.uk call SSR on 02392 35 20 21

NEW!

Superb A2 colour posters of the 1970 Le Mans race cars. These posters are drawn exclusively by Mr Rob Soutar, a graphic artist of extreme talent. They are all produced from a super high quality inkjet printer on glossy photo quality paper. The prints are A2 in size and are a limited edition of 100. The first prints available are of the races 917s, from the Porsche works team and the Salzburg team. All prints are numbered and signed by the artist. Previews will be available mid September.

Prices for prints are £49, plus postage.

Contact

e-mail info@gtslot.co.uk

NEW!

Carbon fibre magnet racing slot car chassis.

A first from GTSlot - a self assembly carbon fibre chassis for magnet racing. The chassis is designed to fit a range of bodies, including the Fly venturi, the Proslot GT2, or 355 and the 360. It is CNC machined from 2mm twill weave carbon fibre and is constructed in a vertical ladder formation. Running with a Fox or Cheetah motor and a small Fly square magnet, on the traditional square black Hornby 1 amp power supply, this chassis has exceeded 5 metres per second for a full lap, not just straight line speed. The kit comes as only the chassis and requires everything else, wheels, tyres, motor, lead wires, guide, axles, body and interior. This chassis represents over three years of development in magnet car racing, the quest for lightweight parts has lead the GTSlot development team to aerospace and motorsport suppliers. The result is a chassis that is super stiff, super light and virtually indestructible. This chassis sidesteps the traditional 'pan' chassis arrangement and instead has a vertical 'girder' stress carrying member. The motor bolts directly to the chassis and the magnet mounts between motor and axle for solid traction. Lighter weight parts mean you can run lower magnet force to corner with increased speed and accelerate and brake faster. This car runs with none of the noisy, grinding, 'stuckness' of traditional magnet racers. If properly set up it feels light and snappy. If you buy, you will win.

There are a range of accessories that can be purchased to suit the chassis.

Lightweight hollow stainless rear axle - £2.50

Lightweight PTFE rear bushes - £1

Fox or Cheetah motor - £6,

Little Ripper motor - £9.

Slot it 24t rear axle kit - £9

GTSlot special racing rear axle kit, lightened Slot.it wheels, lightweight PTFE bushes, Hollow axle, GTS silicone tyres in 19, 20 and 21mm sizes, brass thrust washers, 24t slot.it crown - £20.

GTSlot carbon chassis kit - £16.

Ready to run, Proslot Ferrari 355 - £65 (Cheetah/slot.it etc)